Questions & Answers for: waste tray

waste water still gets emptied but the machine just won't start filling and working normally. Appreciate any advice. remove the kick plate below the door. youll see a white tray behind the kick plate.

Waste tray message will not leave display panel even though tray is empty You will most likely have to remove ( looking at the machine from the front) left cover and clean out some spilled ink from ...

...tray and the waste tube and remove the tray inside the tray you have a number of ink pads of different sizes remove them clean off your tray and replace them with new pads or you can wash out the old ...

...waste tray You will probably have to remove the left side cover and clean some spilled ink from around the waste tray. That normally is what causes that. There is a tray lock on the machine, but I ...

...Waste Tray Missing". Have emptied waste tray which was overflowing and placed it back in machine but above error message means it will not work. The Waste Tray Optical Sensor 119-6487-80 is probably ...

...waste toner bottle is located above the paper tray.take the paper tray out, then you will see a bottle inside on top of tray. it is flat and you have to pull it out and empty the waste toner from it. ...

printer stop ink tray full ?????? > ink try full ? It is the tray that holds the "wasted" ink that is full. Replace the waste-ink tray, or get a printer-technician to do it.

waste ink tray. Essentially the printer would not reset. Solution for me was to remove the tray and shine a flashlight into the chamber which exposed some waste ink that had fallen inside the machine

...of tray one. all you will need to do is remove the tray one complertrely and open the left cover nexdt to the tray. the waste toner bottle is in there and you will have to pull it it gently. good ...

...waste tray missing but it is not we were given this printer, as owners were going abroad, it has been sitting for around 6 months boxed up in garage, now it starts ok but then stops and message says ...