I was getting an "Empty waste ink" message on my phaser 8860 even after emptying the waste ink tray. Essentially the printer would not reset. Solution for me was to remove the tray and shine a flashlight into the chamber which exposed some waste ink that had fallen inside the machine (but outside of the tray. The waste ink stopped the tray from sitting properly in the chamber which then causes the printer not to reset the waste bin message to empty status.
The waste bin full error can occur if the waste bin was not removed
from the machine for over 10 seconds when it was emptied. Please remove
the waste bin and wait for a full 10 to 20 seconds before replacing the
Waste bin.
If the message still displays turn off the machine and leave it off
for 1 minute then turn the machine back on.
Then run software update to make sure you have the latest OS updates.
Then delete the printer and re-add the printer.
939 views
Usually answered in minutes!
×