Questions & Answers for: sharp dlp lamp problems

Question about 56DR650 56" Rear Projection HDTV

2 Answers

sharp DLP No picture I have a sharp 65DR650 DLP, I have sound but no picture, green light blinks a few times then red light blinks and the T.V turns itself off, I have replaced the lamp and still no ...

Ad

Question about 65DR650 65" Rear Projection Television

2 Answers

...Sharp DLP TV I was watching it and it went out. It has come on a few more times. What can I do, is it expensive if I have it fixed? or am I better off buying another tv? You likely just have a bad ...

Ad

Question about 65DR650 65" Rear Projection Television

1 Answer

sharp model 65dr650 rear proj. t.v is ther a simple test i can perform to tell whether my lamp or color wheel is bad...any way to tell difference between the too by a simple test....or maybe i can get

...Sharp xr-10x DLP projector. We had ours since last holiday season and it just went out...totally--no power...no lights...no functions. Hoping there is a reset button...as it appears to be more than a ...

Question about DLP HL-P5663W 56" TV

1 Answer

...dlp model# hl-s 5686w. Set comes on and plays for 5 to 7 seconds. The picture starts dimming with sound then eventually shuts off. I can turn it on again and the problem repeats. replace lamp at is ...

Question about XR-10S DLP Projector

1 Answer

Sharp projector lamp will not come on ''I have a Sharp xr-10s I replaced the bulb but now will not power up other than standby'' Green light is on, fan is running. Nothing else lights up. I replaced ...

...Sharp DLP Projector, lamp indicator We tried 2 different new lamps, and the lamp indicator light remains illuminated and the device will not turn on. Model XV-Z2000 You don't mention whether the ...

Question about HL72A650 Television

1 Answer

sharp DLP allows for the user to replace the lamp pretty easily so there is a chance you could be able to replace yours if that is the problem. The color wheel is a different story. That will probably

Question about XR-10SL DLP Projector

1 Answer

will not coming on ,standby light is orange temp and lamp light not on hi, Just try to reset the lamp hour of your projector. For resetting the projector do the following. While simultaneously holding

Question about 1410X DLP projector 2700 ANSI lumens XGA (1024 x 768) 43 with 2 years Advanced Exchang Projector

1 Answer

...sharp, that would indicate a faulty DLP block (not worth repairing, unless under-warranty.) If they're more 'blob'-like, it's probably just dust in the optical block. That can usually be remedied by ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Televison & Video Experts

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

73781 Answers

Larry

Level 3 Expert

5043 Answers

ADMIN Eric
ADMIN Eric

Level 3 Expert

42220 Answers

Are you a Televison & Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...