Questions & Answers for: remove washer timer knob

Timer Knob We have the GE space saver washer/dryer. We need to replace the eniter timer unit we got the old timer out completely except for the knob. We looked at the new one and noticed its clipped ...

washer, however, I cannot get the timer knob off in order to replace the part. How do I remove it without breaking it? you have two different knobs to replace?..is it the water level knob or the timer

...washer (Model 20954) If there is a black tab on the back of the timer, it needs to be pulled out of the timer before you can remove the knob You pointed me in the right direction, the tab was clear ...

...washer start spinning. Remove any obstructions in drain hose and or straighten drain hose to remove kinks. Lid or other object hit timer knob and turned the washer off - Make sure the Timer knob is ...

...to attache the new one? THE TIMER KNOB CAP REMOVES AND THIRS A CLIP UNDER IT REMOVE CLIP KNOB WILL PULL OFF YOUR SEE A SCREW OR 2 REMOVE TIMER MAKE SURE THE WASHER IS UNPLUG FIRST REMOVE BACK ...

...remove the knob on my washer so that I can replace the timer. However, I cannot figure out how to remove the knob. The timer is metal and does not have threads on the new part's shaft. I do not see a ...

...find any instructions for removing and replacing it. Remove top of washer then Remove timer knob then (2) screws behind knob, un- plug timer connector and replace of course always unplug machine ...

...washer #LA8800XT and want to remove the Fabric Softener dispenser so I can remove the agitator. Does it just screw off? It seems to be stuck and I didn't want to break it if it didn't screw ...

...remove the old one The washer timer knob is spining and no engage on the indicator oh boy these are varied in the way to remove them, but usually under the knob is a pin, or screw and in some cases a ...

...remove timer knob on washer to replace. It unscrews or if it is a newer model, remove the console so you can tip it forward. You will see a (usually black or white) pin in the center of the timer, ...