...blender express and I can't get it opened to fix it. I have removed all the screws on the bottom but I still can't get the bottom off. Does anyone have any ideas? I removed the motor coupling and ...
Question about 5000 Work Top Blender
...in the circuit that is gone. There is any way to get a manual repair? Switch must be bad, remove the four screws on the bottom they are under the feet, then check switches, and replace broken
...bottom part, with the blades, is probably detachable, and you can grasp it, and turn it counter-clockwise to detach it, and connect your other attachment by locking it in clockwise! just a guess! i ...
...remove the blender jar from the power base. Were you successful in removing the bottom ring which normally screws on to the bottom of the blender jar from the powerbase? You should make sure you have ...
remove the bottom from the blender jar is to put the blender jar back on the blender base (make sure it locks in place) and then turn the jar to the right. You'll feel the jar detaching from
Question about Kitchen Aid Kitchenaid 5-speed Ultra Power Blender Blenders 5-Speed Blender
...bottom with left hand threads. However the nut will not fit over the drive gear to allow removal of the blade unit. Does the drive gear come off? Does the blade unit remove from the top? Older ...
Question about 34000 Blender
...bottom of the "food canister". I'm not sure but believe the seal is too old and needs to be replaced. Any help would be much appreciated. You will need a special wrench to remove blade assembly. then ...
...remove the bottom of the blender? The bottom of the blender has multiple Phillips head screws, but there are 2 screws that are specialty screws (safety/tamper resistant screws). Can anyone positively ...
Question about Ninja Master Prep Blender and Food Processor, Blue
...guard from the base to remove blades and clean container Good evening it is difficult to take the bottom things from each other. The blenders I know are screwed to each other, all the ...
Question about Ninja Master Prep Blender and Food Processor, Blue
...remove the base gear by using a screw at the bottom of the blender. However, there is a plastic cover at the bottom of the blender due to which we cannot access the screw. What should we do? The ...
Usually answered in minutes!
71 Questions
68 Questions
53 Questions
57 Questions
