Questions & Answers for: printer constantly getting stuck paper

Try cleaning your printer and its rubber rollers. Also make sure there is no object stuck inside the printer that prevents the printer from loading the paper smoothly. may be you have no other problem

...Paper gets stuck. Takes more than one piece of paper at a time. needs servicing of paper pickup roller and pad separation. Open the paper tray and check for paper dust on pickup rollers Clean the ...

...printer STILL jams constantly. When I am closing the month there are some reports that will print only once. I cannot tell you how much data I have lost because of paper jams. Furthermore, I see no ...

constantly jams and gets stuck in the printer. I wonder if I need to do some alighment as I don't think I did this the last time I installed the cartredges. How do I do this if this is what is needed?

...printer in that the initial feed gets stuck. I have to constantly pull out the paper tray, and lift the top part to reset the machine. Just roll the roller and check for any bit of paper. check ...

...constantly says there is a paper jam, even though we can't see any paper in the machine. when we try to restart and load paper, it doesn't load properly. One side of paper goes in faster than the ...

...constantly and twice a month if a casual user) NEVER NEVER NEVER get mad and RIP out stuck paper. Such an action will break internal mechanisms inside your laser printer. Hope this helps Have a great ...

...on. Paper is getting constantly stuck in printer and so I can't use printer. Try cleaning the roller on the front part of tray. It may be dusty. When it is dusty paper can slip and cause

...constantly jamming; every black catridge I put in starts leaking. How can I fix it? If you are getting a 'carriage jam' error as soon as you turn on your printer with no tasks in progress, then check ...

...constantly, Kindly check the paper tray. Remove the Cartridge from the printer and power cord , Turn upside down the printer shake may be some paper might have stuck then reconnect and let me know if ...