Questions & Answers for: offset printing

...printing is offset by about .050" any advise other than in the layout on screen? The postition of the print on the label must be controlled only by your software, it cannot be changed at the printer. ...

...offset My Epson R-260 printed a couple of discs and it is printing on paper okay, but now it offsets the printing way to the back and left of the disc. Moving on the print positioning menu seems to ...

After paper jam text is offset 1 mm every 0.5" Last sheet of paper jammed and when pulled out left small piece of paper in rollers. Got it out with tweezers, but now all subsequent pages printed are ...

ricoh sp c410 yellow toner is offset in prints My ricoh sp c410 offsets the yellow toner in every print - basically the yellow print is offset to the rest of the colors in the picture creating a ...

The prints show horizontal lines offset. When I print drawings the horizontal lines are offset every 50mm approximately. Is there any setting in my Imac that might be the cause of this problem as, for

...printing at the x offset when i printed a card using evolis dualys printer the output came with a blurred printing at the x offset side..it looks more like the color are not mixed very well..i tried ...

...offset is set too low or too high, in other words the printing is beginning too close to the left side of the card, or ending too much to the right side so when the print head goes down to print on ...

...offset printing first page prints properly and it happens randomly when half of a page skips or offsets (only prints half of the page) and then goes back to printing properly again. It's happening ...

Why does my Konica Bizhub 253 offset the image? My A4 landscape prints are approx 4mm offset from the centre with everything set to 0 (margin/offset). This is from the input tray or tray 1. It doesn't

...printing low on the lable and thus the last 1-2 lines print over onto the next lable. No error code comes up . A friend of mine looked at it and thinks it is the print head is out of alignment but ...