Questions & Answers for: Evolis offset printing

Dual sided printing When trying to print front and back, the printer will send 2 separate cards through instead of printing front and back of the same card. Under printer properties, I do not have ...

Patchy printing I have tried using the cleaning kit and have changed the ribbon but the printing is still very patchy......flashes of odd colour blemishes appear on the photo images and the print is ...

fading image... i had problem with dualys 3 that im servicing, the were using YMCKO ribbon for 2 sided prints with settings of YMCO/K, but the problem is, it diidnt print the Overlay at fron side, and

...printing at the x offset when i printed a card using evolis dualys printer the output came with a blurred printing at the x offset side..it looks more like the color are not mixed very well..i tried ...

...after it prints 2 cards. I have an Evolis Pebble 3. Clean all transport rollers . check for X offset by giving Rx command in Properties/Tools/dialoge with printers. Increase offset little bit ...

...contrast too much in printer Graphic properties. If this doesn't solves your problem increase x offset little bit using Px;+ command in Dialog with ...

Evolis Pebble 4 with a gold monochrome ribbon. Printing on pre printed blank cards. The print is not complete, almost as if there is not enough pressure on the card as it is printed. All the letters ...

the card have a faint line across after printed. I have cleaned the printer but no luck. Usually a faint, light line running the full length of the card is indicative of either a need for cleaning, or

what is the solution if the printer didn't print? When you try to print from a program like microsoft word, clicking print command it should bring up a print window and there it shows what printer the

evolis dualys3 printer printing with the ribbon sticking to the card Printer is printing with the ribbon sticking to the card, when coming out 99.9% of the time when the ribbon sticks to the card when