Questions & Answers for: Lite On master cd Computers & Internet

master/slave one is the cable is back to front. I.E. the red trace on the wiring harness should plug into pin one on the CD drive. With all drives I've seen this has always been the end closest to the

...CD, HD, DVD, Etc). If you have 2 drive connected on the ribbon cable then one must be set to master and the other to slave (the little jumper clips on the back). If it's the only drive on that cable, ...

...cd unit in bios then check that slave/master / cable bridge settings at back of cd are fine.In this case the fastest way to test your unit is to connect it as single unit with a tested ide cable on ...

...CD ROM drive for the master, slave or cable select jumper positions. Does anyone have a manual or diagram that shows the jumper placement? Thanks! SETTINGS: A - Cable Select Mode B - Slave Drive Mode ...

cd player appear tp be one according to the computer. My other burner was recognized as drive F/: which no longer exists.It seems that dvd writer is not even there. Please advise. recent purchase from

master, just like the old one. The computer (XP) seems to think it's a CD drive. It ca recognize cd's but if I put a blank DVD in, it thinks there's nothing there, and in My Computer, it's called a CD

...cd burner quit working what is the problem? each one has jumpers on the back. tiny plastic thing that slides over two pins. there are six pins. three sets of two. one device must be set to master one ...

...cd/dvd rom, floppy drive has them) the options are Master (meaning it is the main drive), Slave (secondary drive), and Cable Select (the cable decides how the drive will be read). There are two ways ...

...master/settings jumper position for slave on LTN-301 CD drive? look on the back of the case and their will be some letter MA,SL.CS the most common position is the middle selection should look like ...

...have it set up via a jumper as master and have another drive on the same cable as master. switch the jumper to slave (instructions are on the cd drive itself) and that shoudl also fix it let me ...