master and then cd rom as slave if on same cable if it is faulty you may need a new ide cd rom not sure how hard it is to get ide but with onew of these you could convert to sata type drive http://www
Question about Compaq tc1000 Tablet PC
...time. How do I load a CD in the tablet? No but you can connect on there CD drive By IDE cable IDE connect cd drive & hard drive u can see first master & slave then u can connect cd drive on ur
...master, (the cd rom is slave)when I rebooted I got a disk 0 error.... Can u tell me what I can do to get it 2 recognize the new hd??? THanks, prince_fanatic2003@yahoo.com Thanks, Tony Just remvoe the ...
a writer on it.i use this pc for recording my own songs i write mr guitar it could be conflicting with the harddrive. If the hardrive is set to master then set the cd drive back to slave and try again
...had any formal training in repair,,,I would instal a CD/R drive onto the ribbon in the B socket on the motherboard. Make sure the CD/R is jumpered master or Cable select and on the last ...
...CD drive Sounds like the jumper setting is wrong, take it out and out it as master or if you are already using a drive as Master then change it to CS (cable select). seems to be a problem with the ...
...but not detected, try to install another cd device or connect usb external cd burner. Check also cables, particularly if using IDE cable, make sure one device set as master and the other as
...CD-ROM with data on it. It it still fails, replace it. Most likely, due to the age of the computer, it has an IDE connection, not SATA. If you replace it don't forget to place the master/slave jumper ...
...cd/dvd drive to your system: If you can only use one at a time (not being able to see at least one drive in windows when both are connected, or not see any drive when both are connected) the ...
Question about Evo N800V PC Notebook
CD. Choose the repair option to repair the master boot record. If you are using Windows XP, put the CD in and choose Repair on the first window. This is a command prompt and this is what you are going
Usually answered in minutes!
3,409 Questions
2,232 Questions
1,799 Questions
796 Questions
724 Questions
