Questions & Answers for: hp cover open error

hp D -7163 error:OXC 18a0205 this is beacuse of 2 reasons 1)printer internal firmware corrupt 2)ink system failure try this Disconnect the Universal Serial Bus (USB) cable from the back of the product

...cover. If prompted, print a calibration page. Reconnect the USB cable, and try to print a print job from the computer. If these steps did not resolve the issue, contact HP technical support for ...

HP Photosmart 1315 Printer SOLUTION: Hard reset of the printer A hard reset of the printer may clear the error. Here is how to perform the hard reset: Shut down the computer. Open the top cover of the

...am getting a error message "The HP Laser Jet 1020 has the front cover dore open or cartridge missing". Now what i should do. Try reseating the ink cartridge and see if the cover door is firmly

...HP on these types of errors: 1: Disconnect the USB cable from the back of the product, but leave the product turned on. 2. Open the cover of the product and remove the print cartridges. 3. Close the ...

...cover. If prompted, print a calibration page.8.Reconnect the USB cable, and try to print a print job from the computer.If these steps did not resolve the issue, contact HP technical support for ...

...HP LaserJet 1020 has the front cover door open or the toner cartridge is missing. The door is closed and the toner crtridge is installed properly. I tried to upgrade driver/software for my window 7 ...

...Top Cover Open. The device cannot print because the top cover is open. Close the top cover and press continue, or cancel the printing. then follow this guide: HP Support document HP Support ...

...cover 2- replace an original hp cartridge by the compatble non hp cartridge 3-unplug the printer 4- close the cover 5-plug printer back on 6- press ok to all messages 7-repeat from step 1 to 6 above ...