...USB hub, try connecting directly to the computer. Make sure that the ports aren't disabled for security or power-savings (control panel - device manager and power savings areas). I hope this helps. ...
...generic driver? If a full-featured software exists for your OS, uninstall the previous driver, unplug the USB cable and install the full software. ...
...USB hubs and try a new cable if any problems occur. If you do not install the software before connecting the data cable, you will often get a generic driver which will run the printer but not the ...
...Uninstall any old driver (including a generic driver from the OS), then double click on the file before you connect the printer to the computer if you use a USB hub. I hope this helps. Cindy ...
...generic driver and disconnect the data cable before installing the Lexmark software if using the USB cable. Are you starting the scan from the computer or the scanner? (Is the monitoring program ...
generic driver. The scanner needs bi-directional communication with the computer. If you have problems, try a new USB cable, a different port and a direct connection if using a print server or USB hub
...generic driver (from the OS) and then remove the USB cable. Restart the computer and install the full software from the above link. The next issue to check is try a new USB cable. Try a different USB ...
Usually answered in minutes!
3 Questions
4 Questions
3 Questions
