Questions & Answers for: automatic suction

the zodiac G4 pool cleaner has slowed down considerably and now gets stuck on the drain so i have to continually drag it off so it will circle the rest of the pool Your Zodiac should ballence all ...

changed the fin on the baracuda, but it still does not move around the pool, can fill the suction if I lift it up, but it does not move. If you have good suction at the head you may have a bad ...

Suction is great, maybe too good. unit does not Suction is great, maybe too good. unit does not travel, or travels very slowly. stays stuck to pool in one place. Your probally right about the suction ...

no movement with my g3 baracuda I have suction, but no movement, when I place my hand over the mouth it creates the pulsating movement until my hand is removed, then back to suction only, no movement ...

my zodiac g-3 just does not move .I have a new filter cartridge.I have good suction to the hose.no visible obstructions.Please help. Check suction on bottom of vac. You may have suction where hose ...

...automatic pool cleaners are not moving: First, make sure that the main drain and and all suction lines not being used are closed. You might be getting some suction, but it might not be enough. Also, ...

...automatic pool cleaner working properly: ? Check to ensure that the main drain and all suction lines are closed, except for the suction line to which Kreepy Krauly is attached. ? Check for debris in ...

How do I switch the vacuum from floor to accessory suction It automatically switches over when you disconnect the hose from the power nozzle. No suction it getting to the power nozzle, so the suction ...

baracuda pool cleaner only running for 4-5 seconds, then stop - suction 100% pool cleaner stops running as if losing suction.pump pressure normal, no bubbles indicating leak. take apart, then assemble

...automatic transmixion Replace fuel filters and check fuel pump pressure. Mitsubishi P0089: Suction Control Valve Stuck https://www.troublecodes.net/pcodes/p0089/ ...