...knobs - freq., eq, and gain turned down, it produces zero sound, but you can feel the current in the subwoofers. besides not producing enough massive power, i have another exact amp in a differ ...
...amp powers on perfectly and produces sound, but only when frequency, EQ, and gain is turned all the way up, or at least halfway up. Even then, w/ all three 100% up, it only produces weak power- maybe ...
...amp powers on perfectly and produces sound, but only when frequency, EQ, and gain is turned all the way up, or at least halfway up. Even then, w/ all three 100% up, it only produces weak power- maybe ...
...amp powers on perfectly and produces sound, but only when frequency, EQ, and gain is turned all the way up, or at least halfway up. Even then, w/ all three 100% up, it only produces weak power- maybe ...
...knobs. I don't know if its the amp or the head unit. Any suggestions on figuring out what it is, or solutions? PS that RCA Cable is brand new. I Had the Same Problem I just unplugged my amplifier ...
my mtx 1000xd will turn on but makes a sound inside near the circle donut looking with(lots of wires soldered) and where my ground is to the trunk bolt and even in side speakers. It will not power my ...
No power to MTX TN250/1 Amp Lost my license, so I left my car sitting in the driveway for 6 months while I was away at college. Meanwhile, my car's trunk accumulated a good bit of water - apparently, ...
Question about tn250/1 terminator 1x200w amplifier class d
Mtx tna251 amp has bass remote that has a light glowing but turn knob up and down and no difference like simply not working no difference in bass? Posible causes, Plug used typical phone plug 4 wires ...
Usually answered in minutes!
4 Questions
3 Questions
1 Questions
1 Questions
