Questions & Answers for: amp knobs Irons

No Drain Knob on my Singer CSP 1 In reading the manual for my CSP 1 there is supposed to be a Drain Knob for easy draining of Water Tank. There is no Drain Knob (unless I am really stupid and blind) ...

My grandson knocked my Rowena Iron model DE-87.1b My grandson knocked my Rowenta Iron model DE-87.1b off the ironing board and the knob broke off. It works fine but I cannot adjust the temperature. ...

Retractable Iron Cord Stuck Jammed under reel. Tried using butter knife to pry out, no luck. Black & Decker brand, First Impressions model. Cannot see way to take iron apart to loosen cord from ...

morphy richards comfigrip 40715 how to disassemble? Phil - I have the same problem. Can't see how to dismantle it at all. Did you ever get a solution? Thanks Chris I've just successfully taken ...

...to remove water tank.At present I hold back of base and pull tank off,this takes a lot of tugging & pulling and I feel that this is not normal . My instructions were thrown out with the box the ...

i cant get my iron to get hot enough it gets warm but then the light will sut off and it will stop heatting up The problem lies with the thermostatic control. Check that your control knob has not been

How do I descale iron - Lost instruction Manual. Put in the tank 50% water + 50% winegar Put the temperature knob to max and let the steam flow out into a drain. Repeat until necessary. This will ...

water leaking out of iron no steam I have a Hamilton Beach Steam Storm Model 14560 Lost manuel The Use and Care Guide for the Hamilton Beach Iron can be downloaded here: ...

I am trying to remove the top cover of a sunbeam CSP1 steam press to rplace the burnt out wires to the temp control .Any ideas Matt The cover is held on by two screws underneath the top cover AND ...

My D2030 iron does not heat up the power light and the screen light come on but does not heat up 1...You need to check the iron settings as they have an adjustable knob that controls temperature as ...