lim kim cheai posted an answer for this Kenwood KDC-PSW9524 CD Player:
"must be careful, if you already make a 2nd try. most the 3rd try if the code again wrong...."
lim kim cheai posted an answer for this Kenwood KDC-PSW9524 CD Player:
"you must leave your radio in power on for an hour just to clear the wait, after that only..."
lim kim cheai posted an answer for this JVC AM FM CD DET FACE CAR STEREO:
"you have to check, make sure the Acc and Power line is correctly connected. wrongly..."
lim kim cheai posted an answer for this Blaupunkt Car Audio & Video:
"Do not rally understand your question, but you can get more info..."
lim kim cheai posted an answer for this Blaupunkt Woodstock DAB 52 CD Player:
"by default you have 3 chances to enter your code, after then time is get much longer for..."
lim kim cheai posted an answer for this Kenwood KDC-X797 Excelon Bluetooth Indash Car Stereo:
"if your radio can get reset by itself, mostly is due to software bug. if symptom can be..."
lim kim cheai posted an answer for this Blaupunkt Car Audio & Video:
"you have to make sure you give correct stereo signal source to the stereo amp input, you..."
lim kim cheai posted an answer for this Office Equipment & Supplies:
"this is the answer 574.15km/62.56liter=9.17759km/l"
lim kim cheai posted an answer for this Car Audio & Video:
"certain radio have such feature on diagnose, it could be the antenna not power up or lost..."
lim kim cheai posted an answer for this Car Audio & Video:
"can you power up the radio? one way to check whether the power amplifier still alive or..."
lim kim cheai posted an answer for this Kenwood KDC-X797 Excelon Bluetooth Indash Car Stereo:
"when detect/reading not compatible format/not support file, this error message may pop up."
lim kim cheai posted an answer for this Car Audio & Video:
"mostly it is in the menu list/ Tuner / RDS you search in this tuner sub list."
lim kim cheai posted an answer for this Car Audio & Video:
"software hang, only way is reset."
lim kim cheai posted an answer for this Car Audio & Video:
"if battery get remove, everything can get reset."
lim kim cheai posted an answer for this Blaupunkt Nashville DAB35 CD Player:
"is the beep sound only happen when you listen to Radio? or other source also have? because..."
lim kim cheai posted an answer for this Acoustic Research ARS115PS Speaker:
"check your speaker impedance by multimeter normally speaker ohms range from 8,6 or 4 ohms..."
lim kim cheai posted an answer for this Acoustic Research 215 PS Speaker:
"try to exchange your left and right speaker to confirm. where the cracking noise come? it..."
lim kim cheai posted an answer for this Acoustic Research AR3 Speaker:
"if you are lucky, you can glue back the magnet system to the main frame if the voice coil..."
lim kim cheai posted an answer for this Acoustic Research 900MHz Wireless Stereo Speakers with Auto Tuning:
"you are using a stereo speaker so definitely you won't get surround sound, Most TV may..."
lim kim cheai posted an answer for this Acoustic Research HTB-80 Speaker:
"if your unit come with external Adaptor power up type. then mostly is the adaptor already..."
lim kim cheai posted an answer for this Acoustic Research AW825 Main / Wireless Stereo Speaker:
"is your itune also connected for charging when you connected to your speaker? it could be..."
lim kim cheai posted an answer for this Acoustic Research 900MHz Wireless Stereo Speakers with Auto Tuning:
"Higher voltage then required is not so recommended, internal circuit may over voltage..."
lim kim cheai posted an answer for this Acoustic Research Phantom 5.2 Main / Stereo Speaker:
"its hard to get 100% same parts, you can try. all the best to you."
lim kim cheai posted an answer for this Acoustic Research 308 HO Speaker:
"be more specific, what type of noise? Humming noise or cracking noise or pop noise? can..."
lim kim cheai posted an answer for this Acoustic Research AR3 Speaker:
"See this link. you can get some ideal how a speaker is made, need skill to repair. ..."
lim kim cheai posted an answer for this Acoustic Research HD510 System:
"check your audio line in connection, either L or R signal line floating may also cause..."
lim kim cheai posted an answer for this Acoustic Research P315 HO Speaker:
"some design need audio signal in to get it wake up from standby mode."
lim kim cheai posted an answer for this Acoustic Research P315 HO Speaker:
"What audio source you put into your Amp? you can lower the source volume also the amp..."
lim kim cheai posted an answer for this Acoustic Research 308 HO Speaker:
"what is your problem?"
lim kim cheai posted an answer for this Acoustic Research Phantom 8.3 Main / Stereo Speaker:
"Normally Speaker and Amp side will mark correctly the polarity. If wrongly connect phase..."
lim kim cheai posted an answer for this Acoustic Research Audio Players & Recorders:
"you have only one? or one pair? this standing speaker need a Amp to drive."
Car Audio & Video 41 answers
Audio Players & Recorders 19 answers
Televison & Video 1 answer
Office Equipment &... 1 answer
Cars & Trucks 1 answer