Questions & Answers for: window hinge replacement

Replacing Window hinges on tailgate window I have a 1999 ford explorer and I need to replace the hinges on the back tailgate window. I need to know how this is done. the hinges should be bolted to the

...window broke and I need to replace the whole hinge. The hinge screws into the tailgate and I tried to unscrew the hinge by turning it, but the hinge gets caught on the tailgate. There was a recall on ...

...window hinges were defective and recalled. Tightening the hinge is relatively easy . . First loosen and partially remove tailgate trim http://www.explorerforum.com/forums/showthread.php?t=310234 to ...

...window down to close it Sounds like the door hinges are worn. Determine if it is the hinges or the hinge pin that is worn. It it is only the pins, which is unlikely, you can just replace these, if it ...

...window hinge. do i need to replace the pin only or replace the whole hinge? hi. the only time i have known these hinge pins break is when they seize solid in the hinge due to corrosion. even if you ...

...window hinge , one on each side at the top of the glass has broken. The passenger side hinge broke loose and now the glass window is only attached on the left side and at the bottom with the catch at ...

window hinge on my 2004 mercury mountaineer the rigth rear window hinge broke at the glass connection. I have a replacement hinge but I can't remove the old hinge off the lift gate. At a point

...window hinge was cut in half when they broke into the truck. How can I fix, repair or replace the hinge. I think it's a hard plastic. The hinge damage may necessitate replacement of the entire window ...

...hinge receiver (a secondhand one is in plentiful supply) - or find a look alike roller and fit it. Cord pully's at the local hardware store may fit, window slider tracks, or even coins with a small 1 ...

...window retainer and rotate it counter-clockwise to lock it into place. Replace the six Phillips screws. 5 Remove the Torx screws holding the hinge and latch plate in place. Reinstall the hinge on the ...