Questions & Answers for: vhf frequency

what's the channel frequencies for a common 22 channel motorola 2 way vhf radio? i would like to connect the motorola with icom. can you give me any site that displays the vhf frequencies table? Not ...

...vhf) model When turned on, the CP100 displays frequency 1, and code 5. I was told that as long as they were both VHF, the F11 can be programmed to the CP100's frequency. There is no manual or ...

...VHF Channels - Frequencies) ? Hi Michael From the owner's manual (Page 14) you need to press "menu", then select "Frequency Group", then you have the choice of USA, Canada or International channels: ...

frequency. Press the MONITOR button to lock it in. (small button on the PTT).2) Then your radio will announce the PL code. Using the same method of pressing the PTT  you can walk yourself through

portable radios Says VHF also but can't get it to program VHF channels the BF888 is NOT a vhf radio, it is a UHF radio so it will NOT program VHF frequencies

change frequency Read the radio and write your desired frequency, must see you radio band. If it is VHF the put the VHF range frequency.

frequency of 154.600 MHz, aka green dot, it is available in the CP100 VHF.) Here is a link to a website with the user guide: http://www.essnashville.com/CP100-operationsmanual-021407.pdf The frequency

VHF, and HF or high frequency. Though the FCC does not allow amateur use of the LF range, there are experimental stations that are allowed to operate ther. See http://www.arrl.org/lf-low-frequency for

...Motorola radios like that too. It is two watts, Vhf of Uhf, you did not say. If your existing frequencies are Business Band and in the same frequency band (Vhf or Uhf) you can get it to match

...vhf frequency it says it is out of band it can only accept 400 to 440 mhz.This goes for all 20 radios that I have. Based on the information you provided, it seems like the Kenwood TK-2000 radios you ...