Questions & Answers for: vcr servo error

...servo error. The micro in the deck cannot control the motors that pull the tape past the heads. I've seen bad reel motors, bad reel servo boards, bad cables, or even a bad tape cause this problem. ...

Error code C:31:70 i am getting an error code c:31:70 with my sony dsr-45p. i think it is the servo malfunction. but would you give some details? this is servo IC problem.

...servo light goes off, and the green channel condition light goes off. Stopping play, ejecting the tape cassette, reinserting the tape cassette, and starting play does not solve the problem. However, ...

...error 02355.dose not play.PLZ solvd this problem. 02:355 it means 355 Detected the S reel FG during STOP and STILL. so for this problem U go to Maintenance Menu And do SERVO ADJUST it will solve ur ...

...error...does anyone know how to fix this ? Err-00 lights when servo disturbances continue for 3 or more seconds during playback, recording or editing. I have seen this problem before, and it was due ...

...VCR Error 02 tape slack - due to faulty Servo (SY Board; Reel Servo or PT Board; Reel Motor Drive) and/or System Control (PTC board; S/T Reel Rotation Detector or SE Board; Tension Regulator

...error code 09-028 Servo and tape path system error. 0 : Mode cannot be identified, or mode identification is not necessary. 2 : Threading motor/FG/sensor 8 : Abnormal current detected. If it?s not ...

...VCR displays FO4 message. The unit refuses to eject tapes. Possible fault with the failure of the servo system, the mechanism , front loading and forward loading or the failure of the drum ...

...service manualfor this model. pleas. Error 91:455 i means: Communication error between servo main and servo sub microprocessors.Dose it take the tape in?if can tell me more.mail me in ...

servo sound. No tape turn. Winding Worms. At playback vcr stuck in still mode. Transport mechanism problem if tape will not ff/rewind----possible drive belts or the direct drive idler wheel that moves