Questions & Answers for: valve job

...valve job? 1500 suburban, engine misses badly under load, eg uphill or towing boat. Scan shows "number 6 misfire," all elec checked ok, so I did compression check; #6 less than 25 lbs! Valve stuck ...

valve job and is a valve job really necessary? A valve job is when someone (or business) recuts the valves/head to properly seat the valves in the heads to the engine. On a 2007 I really doubt that is

...valve job or a rebuilt engine. Put a tablespoon of oil in each cylinder and check the compression again. If it comes up then you need a valve job. If it doesnt change then your piston rings and seals ...

bend valves broken timing belt will bend valves on interference type engines. Usually a valve job with all new valves will fix if pistons are not damaged. Job might not be worth car if its old.

...the engine need a valve job? You may have bad valve stem seals or valve guides, which would be replaced with a valve job. But I would also check the compression to see if there are rings needed

valve job, they have had it for a week now, and just one week prior to it need this valve job I had it in for a tune up, new battery, and fuel injections cleaning for 600 dollars, now they say it will

...valve job, i would think you have rotated the engine by hand before trying to start it, and you have positioned the camshafts and crankshaft, in the correct position aligning the marks on the ...

valve job or replacement of the head due to valve damage or chipping of the cylinder head at the valve seat.  A reman head isn't much more than the machine shop will charge for a valve job. &

...VALVE JOB DONE MOWER IS OVER HEATING AND SHUTTING DOWN TO COOL OFF TO START AGAIN CHECK OIL LEVEL COULD BE LOW IF IS CHANGE OIL AND FILTER BUT GET VALVE JOB DONE BEFORE YOU SERIOULY DAMAGE IT VALVE ...

...when lawn mower crank up it spits and sputters and shuts off you need a valve job done and valves replaced you have to take in maybe carb rebuilt to valve job 100.00 per cylinder carb rebuilt ...