Questions & Answers for: Canon undo function keys Computers & Internet

...do in this order additional function key then keys 2 8 at the same time then additional function key screen should change then press in order copier function clear mmi ok turn main switch off then ...

i just want to do a cold reset Hi, Press the following keys to enter the service mode. Additional functions key > 2 key > 8 key > Additional functions key Scroll to the #clear screen and ...

function key, then press the " 2 & 8 " keys at the same time, then the additional function key again. You should see the service mode screen with all the available service mode functions. I f this

...function key, 2 & 8 keys at the same time, then the additional function key again. Press copier, function, clear, err and OK. Power cycle the copier and the copier should be reset. If the error ...

my cannon iR3320 displays error code E000002-0000. the problem started today after yesterday's power surge Most likely an error reset will take care of the problem. Get into service mode by pressing ...

I get "system error e000" message when i copy I get "system error e000" message when i copy 1) Press the "Additional Functions" key. 2) Press the "#" key. 3) Press > to the "#7" printer ...

undo the yellow cables going to the top of the assembly from their harness.  Then get the power cable out of the way.  I usually remove the screw nad yellow plate holding the heat sink. 

...function key and 2,8 keys at a time and press again additional function key then touch - COPPER / FUNCTION / CLEAR /ERR / OK ! / DC-CON / OK ! .then switch off the power button and start again i ...

HOW TO RESET CANON IR 2204 ERROR E002-0000? Service Mode Entry 1. Press the User Mode key. (Looks like a little man head. Some people call it the function or additional function key.) 2. Press 2 and 8

...function" key, "2" and "8" keys in that order. SSSW will display. Press "OK" key. Change Bit switch 1, bit 0 (might display as the first one on the left using number keys) status, (change 1 to 0 or 0 ...