Questions & Answers for: tray paper settings

Paper Tray Settings I have sorted my paper trays as follows: Tray 1 - A4 Plain Tray 2 - A4 Colour (Fax Paper) Tray 3 - A4 Letterhead Tray 4 - A3 Plain I have also changed the settings so that when a ...

paper from tray 2 or 3 or 4. refer to this link http://support.lexmark.com/perl/support/support.cgi > Tray Selection Settings for Documents Created in Windows 9x Are Lost in Windows NT/2000 > Paper Is

...paper tray (Tray 1, Tray 2, or MPF) appears and press the button. Press the down arrow to select the specific paper size, as shown in Figure 1, and press the button. Press the MENU button. *1 Denotes ...

Paper tray? How can I get it to print from paper tray 2 instead of the paper tray 1. It was working fine yesterday when I installed it and now one of my staff members have messed it up so please help.

...paper from tray 1 it will NOT automatically switch to tray 2. Instead it just stops & beeps, message reads load paper in tray 1! I have checked the configuration on the print server, I can't see a ...

...paper from tray 1 anytime the computer settings don't match the paper loaded in tray 2. Tray 1 is the multi purpose tray and prety much any size paper can be loaded in tray 1. Double check your ...

...paper tray for which you wish to change the paper size setting. Each time the [TRAY SELECT] key is pressed, a paper tray will be indicated with a blinking paper feed location indicator. Use the ...

...paper tray. Make sure that the required paper stock is loaded in the paper tray, and that the paper edge guides are adjusted properly to fit the size of the paper. Close the paper tray. The Printer ...

...Paper into Tray 1 (Letter Size): Open Tray 1 (the default tray) by pulling it out. Adjust the paper guides to fit letter-size paper (8.5" x 11"). Load the letter-size paper into Tray 1. Close Tray ...

...paper. I switched the bypass tray with another machine and the copier will still not recognize the right size paper. printer model is xerox C60 After loading the tray, make sure to select the correct ...