My ais targets are out of line showing them out of the river If the AIS targets are out compared with radar target then turn compass to superimpose radar on to AIS. If the AIS info is out compared ...
furuno 1930 radar magnetron does not heat I need to know which wires supply the power to the magnetron heater. The scanner ( open array ) does not work properly when it is cold out, but works great ...
furuno radar 1621 do not show targets furuno radar 1621 starts, antena rotating but NO targets displayed. Shows only random dots - something like a "noise". Radar was transmiting for 58 hrs total. The
No radar target images My Furuno radar, old but serviceable has recently developed a fault. When switched on, and after warming up, the TX button is pressed, the display works normally, but after ...
Question about 1715 LCD Radar System GPS Receiver
Our Radar Furuno 1715-24NM On. ( Power in Oke ) but can not show drawing in monitor/lcd. thanks. regard - damanik If you have no radar targets, go to longest range 24 miles, gain full, rain and sea ...
Targets are off by about 20 degrees, and we have tried everything on the config menu to try to correct this. What do we do to get targets to be on accurate bearing? Thank you . You have to be in the ...
Question about 1715 LCD Radar System GPS Receiver
we have a radar Furuno 1622 - the scanner scans but sometimes we got echo and targets, sometimes none, sometime we get echos and targets on a small range display (1mile) but none on 2 or 4 miles range
My Furuno MK 1942 does not display any targets. All I see is clutter and noise ( the dots) . We do not have water in out wave guide and we have already bought and replaced the magnetron.Any ideas ...
repair radar india targets not found , the tunnig bar is working ok. how can repair this radar hey guyyou have to change mic .you will solve the problemkk
target not found, change maghnetron.
Usually answered in minutes!
45 Questions
31 Questions
32 Questions
39 Questions
15 Questions
