Questions & Answers for: sub zero side model 632

...Sub-Zero side by side refrigerator - freezer. About two months ago, the top shelf (top 1/3) of the refrigerator became warm compared with the bottom. The lower shelves remain cool but even when the ...

...into the ice maker at each cycle? what is the model number of this fridge? HTML clipboard_______________________________ http://www.subzerolosangeles.com Los Angeles Sub-Zero refrigeration ...

Sub-Zero 511 Freon Leak My 10 year old Sub-Zero 511 has a very slow freon leak in the refrigerator side. About 3 years ago the service tech topped if off for $200, and suggested finding and repairing ...

side not cooling properly my subzero model 532 is having a problem keeping the fresh food side cool and it runs all the time. took the inside cover off and the upper part of the coil is iceing up .the

...Sub Zero Model 590 ,When water or Ice maker switch is pushed in it works but it does not stop.please Help! You are going to have to replace the dispensor module. Go to ...

...sub zero 650? There are different handles depending on serial number. The older of the two is at the top of the door. The screws are covered with a magnetic trim piece. You can remove this by putting ...

sub zero 532 What is the power requirement for a sub-zero 532. Model I have is side-by-side, stainless, doors are about 70 inches. 115 volts on a 15 amp circuit as with all fridges they should be on a

...side model 632 not cooling below 50 degrees and message display reads "vacuum condenser" but I have been vacuuming the condenser to no effect. I'm sorry we must have got disconnected somehow, like I ...

...sub zero model 590 We are factory authorized Sub Zero parts and service. Please contact us at: http://www.fixya.com/repair/d499389-accurate_appliance_repair_service from 7 Am until 9 PM CST for all ...

sub zero refrigerators 632 door won't stay closed Hi, This model doesn't have a standard closure system for the doors, It contains a bar and string system under the doors, some parts may not be ...