Questions & Answers for: squelch working scanner

Question about Pro-2096 Base Scanner

2 Answers

scanner, the squelch is open all the time. On digital channels, you hear a steady "burst" of squelch as the scanner is scanning. On a conventional channel, squelch is open all the time and the squelch

Ad

Question about BC248CLT Base Scanner

1 Answer

...scanner worked great for years and one day it just stated being sticky all channels are still programmed but it sounds like the squelch is to high all the time Uniden wont admit it but it has ...

Ad

Question about Pro-97 Handheld Scanner

1 Answer

...WORKING JUST FINE THEN SUDDENLY THERE WAS NO SQUELCH OR VOLUME. THE KEYS MAKE NOISE WHEN PUSHED, BUT THERE IS NO SOUND FOR THE SQUELCH OR VOLUME. THE SCANNER SCANS FREQUENCIES. I have a Radio Shack ...

Question about Pro-95 Handheld Scanner

1 Answer

squelch quit working in regular scan mode PRO-528 The Trunking mode works fine but regular scan mode remains on single channel as squelch never cuts out static. This is true for all freq ranges and ...

Question about BC340CRS Base Scanner

2 Answers

...scanner is stuck in open squelch Rotate the knob counter clockwise to close the squelch. If this does not work, remove the knob by pulling it off gently and make sure the "pot" is turning with the ...

Question about Pro-82 Scanner

1 Answer

...squelch is the reason it wont scan.....HELP FAST !! BAD TORNADO NIGHT AHEAD !!! Hopefully Resetting or Initializing the scanner will clear the problem and get it working again for you. Instructions ...

Question about BC340CRS Base Scanner

2 Answers

scanner. The squelch refused to work. Sometimes it would -- but then, just static and no squelch. The squelch pot itself was fine, but only had 2 wires going to it -- meaning the squelch for the radio

Question about BC370CRS Base Scanner

1 Answer

...squelch not working Turning the squelch nob doesn't change anything, seems to stay maxed out so the scanning doesn't work either, stays on 1 channel. Should I open it and have look, what will ...

Question about BC898T Base Scanner

0 Answer

...channels,squelch will not work.Can how ever program for trunk tracking but can not receive anything Because the sqelch control is broken, you may have to send your scanner to Uniden for ...

squelch on a uniden scanner model# bc142xL? & will scanner still work? model# bc142xL Why would you try to disconnect the squelch? If you turn it one way, it does not work at all. If you don't

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Radio Communications Experts

Brad Brown

Level 3 Expert

19190 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

73787 Answers

ADMIN Eric
ADMIN Eric

Level 3 Expert

42236 Answers

Are you a Radio Communications Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...