Questions & Answers for: spool stuck

...stuck, when I check its status in the printer window, it says it is "spooling". I reinstalled the driver, shut off everything again and again. I can capture the screen and paste it into Word, and it ...

Spool files stuck in outq in send mode Several times a night, a spool file gets stuck in send mode and either stops printing in the middle of the spool file or just never starts printing. The only way

Spool is stuck I have a Black & Decker ST4000 12" Bump Feed String Trimmer/Edger, which is electric and . I've taken the spool off 3 or 4 times before with no problem. Now it's stuck. The cap ...

...Spool stuck on ? It belonged to my belated Father, and i cannot get the spool off, and have no manual, can i get one please ? Thanks Des the spool should have a bolt or a black knob in the middle of ...

do you get the spool off of a gas (31cc) ryobi weed wacker? The string is stuck up in the spool and I can't get it out. The knob on the bottom unscrews, and the spool comes apart once you get that off

stuck and won't move. Almost like the thread wont come off the spool. Check to see if the thread coming off the spool is tangling on the spool pin or getting caught in the crack on the spool top where

juki sc320 material stuck if your fabric is stuck the liklihood is that the spool underneath is jammed up with threads take out spool and clear threads replace spool, it should be ok then

...spool stuck in rotor cap of GH710 trimmer? Great information, but posted up there ^^^ instead of in the Answer Box. pictures up above. Chrystal Hays Jul 20, 2017 I kind of have a fix for this. After ...

...my thread is wrapped around the spool pin, stuck on the little thread notch on the spool, or wrapped around a thread guide. Try removing the top thread completely and rethreading from the

...stuck below the place where the trimmer string spool is. I have snipped and pulled, but there's enough stuck in there to keep the machine from operating. I use an EGO 56 volt battery trimmer and did ...