Question about 20.4GB 7200rpm ATA-100 HDD p/n 5T020H2 ATA-100 Hard Drive
...hi frined remove your hard disk jumper & u r hard will be slave PLACETHE JUMPER IN THE MASTER AT FIRST POSITION AND REMOVE ALL JUMPERS FROM YOUR SLAVE DRIVE IT WILL BE DETECTED AS SLAVE...
drive as a slave...My slave is detected on the BIOS but when im I open to the windows..it shows nothing.. What should i do? Should i put jumper to detect my slave hard drive? Hi, setup the first drive
Question about 52x32x52 PX-230A Internal CD-RW Drives - Beige (12-pack) (PX230AIBPS) CD-ROM Drive
...drive, SL for slave drive, and CS for cable select. You need to check the existing drive on the cable (probable set to Master if is it is your C Drive) then you need to select SL on your new
Question about PX-716A (PX716ASW) DVD±RW Dual Layer Burner
...slave drive it is no longer a single drive. Simply choose master or master with slave. You need to configure the jumper at the back of the drive as shown in the following picture Configure the CD/DVD ...
slave drive how to make a slave drive on dell optiplex 210L If you are referring to creating a slave HDD, then it is not necessary - as this model utilizes SATA hard drives, there is no master / slave
Question about Desktop MPF3102AT 10.2 GB Hard Drive
...slave hard drive do I need to add I am adding a slave hard drive. Do I need to add a jumper to my existing master fujita model mpf3102at hard drive at the slave present position. I would then have ...
...slave hard drive? how to make this device IDE slave hard drive? Seagate U6 (ST340810A) 40 GB Hard Drive You can make it slave with jumper settings check in back side of harddrive you can see jumper ...
drive to "slave", set the jumper so that it only has 1 pin under it, and doesnt actually jump any pins, or just take the jumper out. only use the "slave" setting if the "master" device on the same ide
Question about Caviar SE WD1600JS (WD1600JS20PK) 160 GB Hard Drive
...slave drive WD1600JS The BIOS is AMI. Under ADVANCED SETUP: The options listed for 1st,2nd ,3rd Boot device include: IDE-0 means Pri master ? IDE-1 means Pri slave ? IDE-2 means Sec master ? IDE-3 ...
Question about Caviar SE WD1600JS (WD1600JS20PK) 160 GB Hard Drive
...drive to slave? set the hard drive to slave Power off the Toshiba laptop. Remove the power cord and the battery.Turn the laptop upside down and remove the panel where the hard drive goes with a ...
Usually answered in minutes!
19,136 Questions
12,215 Questions
7,310 Questions
7,276 Questions
5,470 Questions
