Questions & Answers for: shredder door open

...door sag condition. Also, if the shredder isnt that old, just contact GBC for some warranty work at 800-790-7787 Most shredders use a little lever on the door itself to depress a switch on the ...

shredder door it resets the power switch and you can finnish shredding the remaining paper. is there easy access to the power swithc at the door?? model c-220c fellowes powershred If your shredder has

...Thank you Ray for the advice. The door on the shredder was misaligned causing the magnet not to energize the switch on the circuit board. I adjusted the door and now it operates like new. Thank ...

with wheels? The door you are referring to would be the paper door on the shredder. As for the wheels, ask someone at staples, or check for a similar wheel at home depot, and see if you can replace it

...door is open and off when its closed,  and the shredder has not been undergoing very heavy use (they will overheat and shut off, then be fine in 15 min or so)then its a safe bet to say that it ...

...shredder door open door is closed but 'door open' light continues to light and will not shred Check to see if there's a little piece that broke off from the door. This would be the "safety ...

SHREDDER CONSTANTLY SAYS ERROR DOOR OPEN? the door switch could be bad or not working properly. try to locate the door switch. open the door and see what triggers the switch. sometimes there is ...

...is bent or broken so that the shredder thinks the door is open. The tab activates a switch which tells the shredder that the door is safely closed. Fellowes has a lot of good tips on their

...door on the shredder It may not be a 'door' but there is a protective cover over the shredder blades and that can be removed. A sensor sees if it is properly in place. Try removing the top and ...

...shredder and now the door open light won't go off and we can't shredd anything. The door sensor says the door is open but it is shut tight. How do I adjust/clean/bypass/fix the door open sensor? ...