Questions & Answers for: shock mount

Question about 2004 Neon

1 Answer

shock assembly upper mount to the vehicle is through the inside of the trunk. Roll back carpeting on top of the rear shock tower to access shock mounting nuts. Remove plastic cover from the top of the

Ad

...control arm Remove or disconnect the following: Electronic Ride Control (ELC) air tube from the shock Two bolts securing the shock to the control arm Trunk trim to gain access to the shock upper ...

Ad

Question about 2001 V 92 C Deluxe

2 Answers

...shock mounts and move the lower mount back on the swing arm lowering bike about an inch .a better way is to seek out shorter shocks,measure distance from mounting bolt centers & look for shocks ...

...just the rear strut mount it self when bad and the shocks when through the shock tower mounts which is a part of the body of the car. Good luck and keep me posted, hope it's just the strut it

shock assembly upper mount to the vehicle is through the inside of the trunk. Roll back carpeting on top of the rear shock tower to access shock mounting nuts. Remove plastic cover from the top of the

Question about 2007 Yukon Denali

1 Answer

...and on bottom of the strut called the shock mount bolt remove theme and the shock will come right out.to put new ones mount the top first its easier to push up on the shock to replace the bottom ...

Question about 2007 Yukon Denali

1 Answer

...SHOCK MOUNT BROKEN DRIVERS SIDE SHOCK MOUNT what does ford actually refer to it as ? mount or housing? the factory riveted to the frame part that holds the upperpart of the spring and the upper part ...

Question about 1999 DeVille

1 Answer

Need new struts on rear, Would like to replace with air shocks. Any suggestions on how I would do this? Shock Absorber -The rear already has air shocks on the 1999 Cadillac Deville: REMOVAL & ...

...shock then put new one on stick through shock tower top hole then mount bottom bolt after both bolts mounted then pull the cotter pin if you pull pin prior you will never get it mounted hope this ...

Question about 1987 Mighty Max

1 Answer

...shock absorber mount. Remove the wheel. Remove the upper shock nut, washer and bushing. Remove the lower mounting bolt(s) and remove the shock from the vehicle. Install the shock absorber in the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

73784 Answers

ADMIN Eric
ADMIN Eric

Level 3 Expert

42225 Answers

john h

Level 3 Expert

29497 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...