Questions & Answers for: setup phone lines

setup the phones lines? It has an ext. port and line port Plug the phone line cable into the line port and wait for an incoming call and don't answer the phone, the fax machine should do the rest. Let

...dial a 9 to get dial tone on a centrex line, so in this case if your phone system is setup to dial 9 as a line access code you will actually have to dial 99. hope that helps I have no power in the ...

...setup and another phone number with double rings to your fax calls. This allows you to tell the difference between voice and fax calls when the phone rings. 4. Do you receive voice calls at the same ...

...SETUP, or PHONE SETTINGS. You may have to try several settings to find one that works, depending on your fax machine. Try going to RECEIVE SETUP on your fax machines setup menu. Scroll through the ...

...phone jack is to connect a TELEPHONE to the fax. If problem still exists, press MENU on your MFC, and scroll to GENERAL SETUP, FAX. Scroll to SETUP RECEIVE, and, after writing down the settings, try ...

...>> Phone status >> Active Line >> Line 1. OR (If it not helpfull) Main Menu >> Settings >> in Call Setup >> My caller ID >> All Calls >> Show

setup without a phone line? I don't want to order an adapter online to then discover I still can't complete setup! My service number is 565 0001 8024 6360. My cable provider is Mediacom in Wayzata, MN

...then press 5. This selects Basic Fax Setup and then selects Phone Line Monitor Volume. 3. Press to select one of the options: Medium, High, or Low. 4. Press OK. Trust this is helpful. Please vote.

...phone line has been setup for Decadic dialing and the other line may be setup for tone dialing. If tone dialing is working on one line but not the other then get phone company to change the dialing ...

...setup+my+sharp+fax+machine .. Connect the fax machine. One phone line should be connected from the wall phone jack to the Line port on the fax machine. From the fax machine's port marked Ext or Tel, ...