Questions & Answers for: sata cd

...CD-ROM as Primary Slave & SATA HDD as 3rd Master..IDE Hard Disk and it shows DVD-ROM and CD-ROM same as Primary Master and Primary Slave in the Bios Setup but did not shows any Hard Disk Drives. ...

sata cd rom, swap it for a a ide during o/s install then reinstall after o/s install is complete also enable sata in bios 1st as well. I had the same board with a pent D 3.0 that clocked to 4.122 with

...sata mode in BIOS. You should insert ahci driver to Windows XP CD using nLite read this http://komku.blogspot.com/2007/11/integrate-driver-into-windows.html you can use this driver ...

...SATA driver on the install CD. You need to download the SATA driver for your model laptop from the Toshiba WEB support/download page. If the laptop has floppy drive, then copy the SATA driver to the ...

...You can connect any one of the ports. and you need to go to bios and enable the sata ports if its not done already.. If you have a normal CD Drive you can connect with IDE cable. See the pics ...

...SATA driver in the installation CD, that is why it cannot detect the SATA hard drive. Please click on this link for instructions on installing XP on a SATA hard drive :- ...

CD drive are SATA devices then connect then to the SATA connectors on the motherboard. Hi, One end of the Sata Cable is to be attached to the CD/DVD (Optical Drive) or Hard Disk, whereas the other end

...SATA CD-RW drive be used in a Dell 3000 with IDE drives? I didnt know and bought a dumb CD-RW that turned out to be SATA. All I want to do is replace the non-working CD drive currently in the thing. ...

...SATA Targets: 11 Reading Speed: 18x DVD-ROM Maximum Writing Speed* (*Actual write speed depends upon media and drive specifications) : BD-R SL: 8X BD-R DL: 4X BD-RE SL: 2X BD-RE DL: 2X DVD+RW: 8X ...

SATA Interface DVD-RW/CD-RW Desktop Burner Re-Writer Drive will this work on my HP compaq mine that went bad says drv combo sata 48/32 spares no 419497-001 . but want to install the one asked about as