Questions & Answers for: s2046

I have a Scott s2046, when I pull the choke to start it I have a Scott s2046 made by John Deere, when I pull the choke to start it starts fine. When I push the choke back in it will stop running. need

the mower deck belt on my scotts s2046 comes off after a minute or so of operation. What's going on? Thanks you should have some type of belt tensioner,most common type is a pulley with a spring to ...

I have a scotts/john deere s2046 riding mower (man date 12/98) --hydrostatic trans making a groaning noise--want to fix it before it fails--is there a rebuild kit of some kind? I would try and fill ...

s2046 wont start check spark and compression both are fine rebuild carb

engine idoling way to high An engine will idle too high because of : improper govenor setting, improper carb setting, intake leak, or missing carb throttle plate.

S2046 Scotts B & S engine starts but won't keep running. suspect fuel pump, but when I take off the hose, pump is pumping fuel into carb. S2046 Scotts B & S engine starts but won't

what weight oil is used in a Scott's s2046 Riding Lawn Mower 30 weight oil not 10w30 just 30 weight

belt routing illustrations replacing drive belts on scotts riding mower try PartsTreeRepairClinic

how do i replace the bladeees belt? Remove the deck, Find the pattern of the belt direction on each pulley. While deck is removed check for sharpening blades and greasing spindles.

where are all vacuum lines have to run with full choke on What are you working on? Details please.