Questions & Answers for: Ricoh root release Computers & Internet

XR 7 locked up My Ricoh xr 7 locked up while taking a picture, the shutter won't release. I might have released the shutter again while it was doing a long exposure. Just read on another forum where ...

...down the machine and turn it back on. It goes away then later it comes back. Do you know what the root of the problem is? Thanks! Laser not enough power, due to aging It must be replaced. Is there ...

The film won't advance Hi there, I don't know too much about cameras, but I do know the film is supposed to advance. Also, once I pull the film advance lever, I can't push the shutter release button. ...

...could also be the PCU drive motor, or control board. Sounds like you may need a tech to get to the root cause unless you have a spare PCU to try?? This also explains the colour registration

... take it out (2 screws) are the 2 rollers touching eachother all the way across? If not this is the root of the problem. -Carl ricoh 1027 sc 541 ...

i don't know how to open the camera to put my film in... Press the shutter release button to ensure that the shutter is released, then pull up the film rewind knob until the back pops open. If you ...

How to change the root password You will definitely void any warranty you have doing that. It depends on what version of Linux it is running, do you know? Can you not just call Ricoh and ask them?

HOW TO FACTORY RESET THE SETTINGS OF nrg p 7527n BEFORE RESETTING TO FACTORY MODE, TAKE BACKUP OF ALL YOUR DATA! Press "./*" and "#" key at the same time and hold them for 10 seconds then release the ...

How do i reset SC542 error in Ricoh Aficio SP300DN? Enter service mode (hold the up and down keys for 6 seconds release and push the #) and Sp 5-810 resets the code. the problem root is fuser. -Carl

I want to know how to fixed the Ricoh MP 3054? On the copied paper you can see some line of faded part. What is the root cause of this problem? clean the print heads