Questions & Answers for: rode nt1a

...rode nt1a i recently dropped my rode nt1s, the protective casing has come off leaving an exposed diaphagm. There is a red wire that seems like it should be attached, but have pushed it through the ...

Does the NT1A work with the M-Audio MobilePre USB preamp? The NT1-A will work with any mic preamp that has phantom power.

...Rode NT1A It will need to be serviced. Condenser Microphone Mod Service Hi, Here is a tip that I wrote that will help you with that... ...

...Rode NT1a is not working, I have checked the phantom power and all cables which are ok. If it is under warranty, I recommend sending it to Rode for repair. Otherwise, I can service any Rode mic. ...

...rode NT1A microphone with pro tools i can record perfectly ok and there is a strong signal going in but the recording sounds muffled and 'cheap' on playback. Do you have any idea as to what may be ...

...Rode NT1A requires phantom power of 24-48volts DC. The USB socket on your laptop will only supply 4.5volts. The solution will be to buy a separate power supply or to connect it to your computer ...

Rode NT1A: i got an adapter so i can input it in the mic input the pc says an audio device has been put in but i cant find it anywhere! please help me i also have an Acer Z5710 The reason it is not ...

Rode NT1a Hum and cut out The Microphone seems to make a hum and work for around 5 seconds then cuts out and I hear nothing. Just want to see if there is a loose connection somewhere? I have opened it

Rode NT1a stopped working. I checked preamps My Rode NT1a stopped working. I checked preamps with a phantom power (i use "Art Voice channel" and sometimes kinds of lower class preamp like a behringer,

...rode nt1a is making buzzing noise i dont know why and i'm using this interface to connect with my laptop http://www.thomann.de/es/the_tbone_micplug_usb.ht The microphone may be picking up powerline ...