Questions & Answers for: replacing pump on ge potscrubber

ge potscrubber 1930 that has started leaving more water in the bottom than usually, have cleaned and checked the drain line. It does drain just not fully. Suggestions??? Remove and replace the motor /

replacing parts. Check the pump intake and clear any obstructions. Anything solid (i.e., chicken bones, lemon seeds, popcorn kernels, etc.) can stop the impeller and keep the pump from turning. I hope

ge potscrubber dishwasher will not drain properly Had the same problem with my dishwasher. Took it appart thinking that something was plugging the drain but there wasn't anything. Turns out the ...

pump components. 4. Drain solenoid Some models (for example most GE dishwashers) use a drain solenoid to drain water out. Sometimes the solenoid gets stuck, preventing the water from draining out. Try

...broke. Freeing the motor may break the seal between the motor and pump assembly. I'm in the process of replacing that now. Check for leaks by running the DW before putting the lower panels back

ge potscrubber dishwasher that wasn't running, I pushed the fin portion of the motor that was stuck in place. The washer runs great but now leaks near the pump but only when the washer is on/draining.

...GE Potscrubber Dishwasher Model # VSD3104X04WW is leaking at the bottom, to the left of the motor. What seal(s) do I require to solve the problem? Hello, the seal you need is the pump seal. The part ...

...GE potscrubber 1410 doesn't drain water at the end of the cycle. Drains water fine in the middle cycle. When all cycles are finished there is a standing water at the bottom of dishwasher. Whenever an ...

...GE Potscrubber 1150 who does'not drain. There are several reasons why this can happen. The dishwasher only has one pump, so if the dishes are getting washed and the water sprays around properly, you ...

...GE Potscrubber Dishwashher 1100 that will not drain easy to fix 1st I hope your handy unplug take back panel of you will see hoses in back they will go into a gun metal thingy its the pump 1 going in ...