Question about DVR-625 DTV Receiver / 100-Hours Video Recorder
...from wall for about 5 minutes, plug it back in, if error message appears with the number 311 in the top left corner call dishnetwork, the receiver will need to be replaced for the dvr functions to ...
Dvr powers on for about a minute and then turns back off. I have unplugged it for a couple of hours and plugged it back in with the same result. Is there anyway to fix this or to at least transfer the
dvr powers up plug in the cables when u see searching for satellite. Unplug the satellite receiver from the electrical outlet for about 30 minutes and then try it again. If it still doesn't work, call
Question about Plus DVR DTV Receiver / 100-Hours Video Recorder
...blank and light is blinking. The blue power lights are not on. Unplug the DVR for about 20 minutes and then plug it back in. If that doesn't work its probably time to contact DTV for a
Question about Plus DVR DTV Receiver / 100-Hours Video Recorder
I have a 500GB WD My DVR Expander that is connected via an eSATA cable to my Scientific Atlantic Explorer 8300HDC DVR. It was working great for several months, but recently my recordings are bad. The ...
Question about ViP622 DVR DTV Receiver / 180-Hours Video Recorder
...plug back in(or reboot the dvr), the audio is back again. I am trying to understand what the problem could be. The problem could lie in youir HDMI cable, this is a common issue. if you swap HDMI ...
...plug in the DVR tothe TV. I hope this doesn't sound too confusing. Can anyone help? Thanks! i dont know what kind of dvr you have, but mine has component terminals to plug my cable box in, and out ...
Question about DVR-625 DTV Receiver / 100-Hours Video Recorder
...DVR not available The 024 message means the hard drive itself is having problems functioning correctly. Try a hard reset where you unplug the receiver for 10-15 seconds and plug back in. If the ...
...plug back in. The receiver will reboot itself for you and should restore functionality of the DVR. If that doesn't work the hard drive has likely failed and we would need to send a replacement ...
...DVR. 1. Power off the machine, remove the power plug from the back of the unit. 2. Take off all case cover screws located on the back and side of the DVR and remove the case. 3. There will be a small ...
Usually answered in minutes!
2,410 Questions
2,254 Questions
1,646 Questions
1,423 Questions
1,438 Questions
