Questions & Answers for: Danco replace stem Home

...replace stem in reverse order of takeing off. It's threaded and you use a stem removal tool to remove the old one. Make sure before installing the new stem, that you replace the seat in the manifold ...

I bought a replacement Danko faucet cartridge for an american standard bathroom sink and the package said hot/cold but when I installed it on the cold side the handle turns the wrong way. How do I ...

The handle on my outdoor faucet is broken. I The handle on my outdoor faucet is broken. I bought a replacement at a hardware store but it was just a tad to small to fit over the stem. The replacement ...

I have a Danco 9C-23H/C stem for an American Standard shower stem replacement. I'm trying to identify where the friction ring is supposed to be placed. I've seen it in pictures going on the end where ...

stem for a milwaukee faucet(part 4s-6h/c) it is leaking from the handle... do I need to replace the plastic part that runs back into the pipe? Is there an easy way to remove it? Sometimes on the stems

...OVER THE MODEL # OF THE DELTA STEM IS RP24096 THAT IS THE PART #. CAN YOU PLEASE HELP order a moen replacement online from

water comes out of the spout and shower head when I want to shower. This is after I replaced all the stems with new ones The gate or bypass put of the tub spout is not stopping all of the water from ...

Have a shower only no tub. replaced both the hot and cold stems because shower was dripping and water pressure was low. Thought if I replaced the water pressure would return. Tightened the top nut ...

...faucet Remove knob Unscrew old stem Use flashlight to inspect seat for damage and corrosion. Dress or replace seat if necessary. Install new stem Reinstall knob Turn on water supply and check for ...

Replaced faucet cartridge but can't seat stem properly I purchased a 3s-16h/c cartride, set the spring and ubber gasket firmly inside, worked the cartridge in, tightened the nut and replaced the stem ...