failure problem where the laser can no longer burn, but may still be able to read cd's only. You will have to replace the drive, they are quite inexpensive, about £30.00 or $60 US and very easy to fit
...clean the lense on your cd / dvd drive and if that does not work then I would test the discs that do not work in that dvd drive in another computer and if that works then may need to replace the ...
...CD-224E, model version -B66. The drive will only open when inserting a pin in the release hole. When a disc is inserted and the drive closed the computer can not read it, the disc keeps spinning and ...
Question about Dw 224E-R Disk Drive CD-RW / DVD-ROM Combo 24x24x24x/8x IDE Plug-in Module 5.25" Slim Line DW22... Burner
...the disk. Device Manager says its working correctly, and the driver is correct. Hello. First try a disk drive cleaner. If still a problem, the only solution is to replace the drive. Hope this
...cd rom including electical extensions and make sure they have a secure connection or just replace them there might be bad/faulty or your drivers may have been corrupted or you might have a virus run ...
...replace them there probably old and faulty make sure all leads that are attached to your drives dvd\cd 3 1/2 inch floppy have secure connections and are not faulty if this does not fix the problem it ...
Question about (CD-224E-A34) (CD224EA34) 24x CD-ROM Drive
...cd reader is getting enough power test all leads that are attached to the dvd burner including electical extensions and make sure they have a secure connection or just replace them there might be ...
...loads on my other laptop The hardware of your CD/DVD drive has failed. Either replace it, or "network" your two computers together, to "share" the working CD/DVD drive across your
...replace them there might be bad/faulty or the drivers may have been corrupted or you might have a virus run your antivrus program you might have to physically unplug the leads for this cd/dvd drive ...
Question about 1x1 DVD/CD Duplicator, DVW/D11A/KIT Burner
...The "source" CD/DVD drive is broken -- either the laser is not generating light, or the receiver is not detecting any reflection of light from the surface of the media. Replace that one CD/DVD
Usually answered in minutes!
41 Questions
39 Questions
22 Questions
17 Questions
17 Questions
