Questions & Answers for: removal of pcm

Question about 2001 Neon

1 Answer

Scanner reads code (060) Wich said that engine ECM is faulty, so I want to locate engine ECM and get serial number or part numbers inorder to get a reaplacement...Where is ECM located? Location of ...

Ad

PCM) CAUTION: Electronic modules are sensitive to static electrical charges. If exposed to these charges, damage may result. Refer to Module Servicing Precautions in Section 18-01 . Removal Disconnect

Ad

...pcm located on a 1997 jeep cherokee Removal & InstallationDisconnect the negative battery cable. Remove the coolant reserve tank and disengage the three electrical connectors from the PCM. Remove ...

Question about 1997 Grand Cherokee

1 Answer

...side kick panel. Remove the PCM bracket clip. Remove the PCM. To install: Installation is the reverse of removal. Tighten the PCM connector retaining bolt to 36-44 inch lbs. (4-5 Nm). Hope

...REMOVAL & INSTALLATIONSee Figures 1, 2, 3, 4, 5, 6, 7 and 8 Fig. Fig. 1: The PCM is mounted behind the fender, adjacent to the EVAP canister Fig. Fig. 2: Remove the module-to-bracket retaining ...

...PCM. Removal ProcedureImportant: It is necessary to record the remaining engine oil life. If the replacement module is not programed with the remaining engine oil life, the engine oil life will ...

Question about 2001 Focus

2 Answers

...PCM is hid inside the car behind the kick panel on the passenger's side. Removal & Installation Disconnect the battery ground cable. Remove the instrument panel side trim strip. Remove the ...

(PCM) Removal and Installation Disconnect the battery ground cable. Remove the powertrain control module (PCM) electrical connector. Remove the PCM. Remove the stud bolts. Remove the cover and the PCM

...PCM must be programmed. Removal Procedure Important: It is necessary to record the remaining engine oil life. If the replacement module is not programed with the remaining engine oil life, the engine ...

Question about 2005 Rendezvous

1 Answer

ECM 2005 Buick rendezvous replacement where is it found Do you know that a replacement ECM would need programming ? Dealer .An it's a PCM - powertrain control module ,because transmission an engine ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Popular Products

Top Cars & Trucks Experts

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

73783 Answers

ADMIN Eric
ADMIN Eric

Level 3 Expert

42221 Answers

john h

Level 3 Expert

29497 Answers

Are you a Cars & Trucks Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...