Questions & Answers for: reload bobbin

Bobbin has no motion I ran out of bobbin thread. I reloaded the bobbin. I replaced the bobbin in the exact same spot it always goes, threaded the thread according to the diagram as always, and now the

...reload bobbin but machine wont spin bobbin fast enough to put thread on it most likely you do not have the correct bobbin that fits on the bobbin pole. on the bottom of the pole there may be a small ...

...reload. bobbin thread could be old or if the bobbin was wound on a different machine the tension could be wrong for this machine. when reassembling bobbin case make sure that all parts are seated ...

...to raise and disengage. The fabric is pulled into the bobbin area. I have changed needles, bobbins, reloaded bobbin, cleaned lint from bobbin case and area, rethreaded needle, changed tension. when ...

...I have the bobbin thread pulled thru but still won't make a stitch if needle or arm is not moving ensure bobbin reload is switched off as this often disconnects main function. hope this was

...stuck in the steel bobbin case. I can not get it out to reload the bobbin. not a good thing but try putting the whole thing in the freezer for awhile . will make it shrink and perhaps just fall ...

i got pfaff expression 2 not stitching i have rethreaded changed needle reloaded bobbin cleaned out all of bobbin area If the thread is not picking up the bobbin thread and you have installed a new ...

sew embroidery mode. Machine stops, saying i don't have enough bobbin thread. i filled a bobbin and reloaded the machine to only be told the same thing. There may be a sensor "eye" for the bobbin that

...reload the bobbin. Check top thread tension. To check top thread tension, move presser foot up, then make slow steady pull of the top thread. The thread should advance smoothly without hesitation ...

...make and model? What is your experience with this machine? The top thread, bobbin thread or both? Suggest you try removing the bobbin and clean area and reload bobbin. Check that needle is not