Questions & Answers for: pully puller

...pully remover thingy lol or is there an easier way? Normally...three bolts for the pulley assembly, and one large center bolt, and yes...a steering wheel puller will work, but make sure the puller ...

how do i replace the harmonic balancer on a 95 royale 88 Remove all belts and rad, use a pully puller to remove the belt pully, and then you need a special puller to pull the harmonic balancer.

...to replace the timing gears. how do you remove the crank pully mount? you will need a gear puller need a puller check with ur local auto stores some of them loan or let u borrow their tools for ...

...the power steering pump pully. The center hex nut, is it left handed or right handed? It is on an 1980's chevy 350. you need a puller for power steering pully it is presed on. it is a special ...

im trying to remove the power steering pully on a 99 v6 is there a special puller for this or can you use a standered puller they have pully puller at your local parts store

...pump itself, but the pully on the end of the cam shaft. Tried a gear puller to no avail. there should be a bolt in the middle of the pully, remove bolt and use a wheel pully to pull it off. Good ...

how to remove crankshaft pully requires a puller. A 3-jaw puller might work, but there is a puller made for crankshaft pulleys/dampers

...(rear cam shaft?) is blocking it. do I need a puller to remove that pully. 96 olds LSS If you don't want to damage the pully or anything elese around it a puller is the best way to go on

...pully if there is not enough room for the pully puller take the pump off first. you may need a different puller if the pump wont come off, usually there are holes in the pulley to get the bolts

...puller to remove the power steering pully. I tryed the conventional three prong puller and found the 4" is to big to get in there to grab thre front of the pully due to the low placement and the body ...