Questions & Answers for: Yamaha prt Computers & Internet

...you run self diag. press [FM/AM] key + [Input mode] key and press the [power/standby] switch. ps prt = power supply problem dc prt = shorted output or leakly cap in channel tmp prt means to hot on ...

...does not start. 1. When holding straigt and audio select and swiching the receiver on, it say PS2 PRT: 079L and SLEEP in blinking. 2. I go to 23. Present and switch to RSRV and switch the receiver ...

...the receiver in emergency mode by holding audio select and straigt on startup, a error code TMP PRT 087 is printed. When the receiver keeps in this state for a few hours, I can shut it down and ...

my unit goes into protect mode as soon as i turn it on. shuts off. code in the diag menu says PS2 prt:009 H. does this indicate a power supply failure or is it possible to even know what is the cause ...

...sensor? When starting amp diagnostics DIAG the history of protection function displays TMP PRT:000 H. DIAG menu 10 (AD DATA CHECK) reveals temperature is zero (TH:000). Receiver turns on

...the unit and it worked again for another 40 mins until it clicked off again. I get an error: PS: PRT 135 H and have seen: PS: PRT 138 H PS: PRT 146 H PS: PRT 133 H in diagnostic mode, I also ...

...required.
(6)If thermal protect, replace a thermal sensor.
(7)If power supply problem, ps prt, check all
power supply circuits, including regulators

What does it mean PS PRT:16% - which is normal range for it, which is IC 242 pin for it , which is the reference for it ??? DC:37% PS:16% Your question makes no sense.

Yamaha RX-V 2300 Receiver turns on & then turns off within 1 second. DIAG: TMP PRT:311 F When starting amp diagnostics DIAG the history of protection function displays TMP PRT:311 F (normal value is ...

Yamaha rx-459 turns on & then turns off within 1 second. The history of DIAG is TMP PRT:000 H I have changed the lm61ciz but the problem still remain the same. The issue you're describing with your ...