Questions & Answers for: projector diy

Trying to update Firmware on a Sim2 HT300 Hi Guys, I am trying to update my Sim2 projector to the new firmware. I have downloaded the flasher and firmware but when i try to connected with COM1, ...

Seems the rgb is note centered getting 3 ghosts This is a convergence problem that will require factory service. Convergence adjustments must be made with particular test images and tools to access ...

...good and still fan code test fan, if bad fan is replaceable most electronics or some computer stores should have it if u want to diy can use serial&model number of projector or numbers on the ...

left side of screen has shaded area as if something came apart and is blocking the projection of the media If you have not already found out, your problem is Light Tunnel Failure. It is common and can

projector soon? If you have not already found out, your problem may be a Light Tunnel Failure. It is common and can be corrected DIY. Replacement part is nearly non-existent and manufacturer repair is

starting to get an orange shadow on the right side of picture If you have not already found out, your problem is Light Tunnel Failure. It is common and can be corrected DIY. Replacement part is nearly

half of the screen is dark. Tried a new bulb wilth no effect Sounds like Light Tunnel Failure. Very common. Biggest problem is that a replacement part is almost non-existent and a manufacturer repair ...

yellow blur on screen Blue LCD (from RGB ones) is either dirty or burnt. Google how to DIY exchange it.

...projector lamp as it powered with logic switching ...0 V or 5 V set by its company ... Go through following Web : http://www.diy-community.de/forumdisplay.php?f=60 http://www.allinbox.com/modding.htm ...

...https://www.facebook.com/DIY-Projector-Kits-122591113728 DIY LED Projector http://www.aliexpress.com/popular/diy-projector-parts.html ...