Questions & Answers for: NEC projector clock Home

...projector cannot turn on and the manu is not displayed. Do the following: For VT670/VT470 Press the help button on the remote control for a minimum of ten seconds. For VT570/VT47 Press and hold the ...

...Clock and Phase manually but the image still is ghosting. I even hit default and because the projector is ceiling mounted everything was upside down however when the image is upsidedown the ghosting ...

...projector cannot turn on and the manu is not displayed. Do the following: For VT670/VT470 Press the help button on the remote control for a minimum of ten seconds. For VT570/VT47 Press and hold the ...

...clock is reset to zero, the lamp indicator goes out. Same blinking status light. I replaced the bulb and tried again, same blinking status light. I checked the filter, etc. This projector has not run ...

clock - The projector still stops working. Can someone please help me out of this situation change the lamp even if the old lamp use original nec remote contro l6. After you install a new lamp, select

projector cannot turn on and the menu is not displayed if this happens do the following while in 'standby' to clear values for Remaing lamp Time and lamp hour meter for vt670/470 press the help button

...auto adjust button on the projector and then adjust the clock/phase in the menu. If not you will need to send in to NEC it could by the color wheel. Usually they have a warranty for a couple of

...projector lamp and still no light what am i missing. all i get is a solid red lamp indicator and a orange power indicator. hi, Did you reset the lamp hour after replacing the lamp. If not do the ...

How can I reset a VT540 without a remote it has steady orange and red lights on so is in standby after bulb change Simple. Press the Help button on the remote control for a minimum of 10 seconds while

...projector cannot turn onand the menu is not displayed. If this happens, press the HELP button on the remote for 10 seconds to reset the lamp clock back to zero. When the lamp clock is reset to zero, ...