...paper is coming out the back of the printer and not the front. How do we change it back so the final copy shoots out the front of the printer? Look at page 12 of the manual that can be viewed here: ...
printer misfeed. I know this oki is anchent...the problem I am having is: As the leading edge of the paper passes the picker roller it goes under the drum toner sensor and stops at a set of under-over
Question about B4600 Digital Mono Printer - Black
the paper comes out just push the extra piece in that helps to catch the paper until it clicks and it will automatically start coming out the top so you pages are in the order that you want them to be
...printer run, the paper would come out. It won't run until the paper is out, when you lift the lid, all the way in back is the fuser and it can be removed either with phillips screws or just a lever. ...
Question about MICROLINE 591 Matrix Printer
...printer, or a piece of paper has been jammed in there. First step, remove the ink cartridge, and turn the printer upside down and gently shake it, see if anything comes out. If nothing goes, or you ...
...out the back of the printer (OKI B4350) There are two ways paper can come out. Just enter/insert/ push in the tray from the back of the printer. If you need further assistance leave a comment. ...
...intended for thicker paper and card. Look at the back of the printer near the slot where the paper is exiting. There should be a lever or knurled wheel which you can select the paper exit path
...paper useEnsure your printer works ok with plain paper so we know it aint a printer fault but I'd say it due to how we are feeding the paper and how we have the paper type set and not feeding out ...
Question about C5200n Laser Printer
printer but no paper jam was found. Open the top. Pull on the top of the toner cartridge (don't release the latch, just pull it up). It will come up with the toner drum assembly attached. You will
Question about ML3410 Matrix Printer
do with the paper bail not sitting in the right position. I once had one that jumped out of its correct position. Its also poss that the springs have come off. Check that if not solved come back to me
Usually answered in minutes!
2,817 Questions
2,244 Questions
2,161 Questions
2,149 Questions
1,912 Questions
