Questions & Answers for: HP printer line Computers & Internet

HP 5610xi all in one printer, Lines in the copy The printer haves perfect print from computer. But for copying, there are stright lines. I don't know how to open the printer and clean it. I used to ...

...printer line 1 the other type of line is shared that means you use the same line for phone and fax in this the connection should be as :- telephone line from wall jack to the printer line 1 then from ...

...set to off-line. Check the printer buttons. 4. There is no paper in the printer or the paper tray is not properly set. 5. There is some other problem which generally causes the printer to go off

...off line. I've unplugged the usb, the printer, restarted the computer, etc. Nothing gets the printer back on line. Please help. Click use printer online in the properties menu, via printers and

...printer on line. ------ The procedure is as follows:--- 1) Click the start option at the lower left corner of the task-bar. 2) Then click "settings" option. 3) Then click the printer & faxes ...

...is connected to Line 1 on the back of the printer and then going to any other device. Condition 2 - If you have DSL line Make sure that the line is coming in the Line 1 of the printer from ADSL ...

line is always busy when dialed to and printer connected. When printer disconnected after dialing, nothing is heard. When phone line is connected to phone, all works (dial tone, dial in-ring, dial out

...printer line in port, parelall phone should be connected to extention port,don't split the line for printer & phone. Telephone line voltage should be 48V with/without line connected to the ...

...printer line in socket(marked as box symbol)dont insert tele phone line in phone symbol socket.. 2..Telephone line straight away to printer line in socket.. from extension socket(marked as phone ...

printer off line printer indicates off line, how do I get back on line/ go to printer folder then double click printer then check there is right tickmark on use printer offline just remove it and ...