Questions & Answers for: print offset

...offset by about .050" any advise other than in the layout on screen? The postition of the print on the label must be controlled only by your software, it cannot be changed at the printer. Therefore, ...

...offset My Epson R-260 printed a couple of discs and it is printing on paper okay, but now it offsets the printing way to the back and left of the disc. Moving on the print positioning menu seems to ...

...0.5" like this |abcd |abcd (offset 1 mm from print above & below) |abcd Have tried all Canon maintenance tasks. you still have a piece of paper stuck some where in the paper path have a closer ...

...print is offset to the rest of the colors in the picture creating a yellow ghost effect. Why? and how can it be fixed? Go into the menu that says maintence )I think) and do the color registration. I ...

...offset. When I print drawings the horizontal lines are offset every 50mm approximately. Is there any setting in my Imac that might be the cause of this problem as, for example, a draft print setting ...

...offset side..it looks more like the color are not mixed very well..i tried adjusting the x and nL but it doesnt work..how can i solve this problem? Print head is not aligned properly . You need to ...

offset to 17. Do not increase or decrease the value by more than 5. If ribbon appears melted onto card, the print head may be damaged. Do not try adjusting. Immediately contact your re-seller or Zebra

some pages offset printing first page prints properly and it happens randomly when half of a page skips or offsets (only prints half of the page) and then goes back to printing properly again. It's ...

Why does my Konica Bizhub 253 offset the image? My A4 landscape prints are approx 4mm offset from the centre with everything set to 0 (margin/offset). This is from the input tray or tray 1. It doesn't

...print thousands of lables on it in the next week or so. Adjust vertical offset in printer properties. If that doesn't fix it, adjust it under "advanced". Or... you can set the offset in the printer ...