...Prewash Option button four (4) times within five (5) seconds. C:00 will show in the display. NOTE: If Model does not have PREWASH Mode as an option, press RINSE/HOLD. If the Starting procedure fails, ...
...button for 3 seconds and it should work.. It is recommended to try putting the machine into diagnostic mode. If it won't enter diagnostic mode, then you need to replace the main control board. ...
Question about Duet GHW9150P Front Load Washer
...button the Prewash and Heavy buttons are lit and 116 (minutes)on LCD panel-There is a quiet motor sound like as if it is going to fill but no water enters the machine,after i minute the motor stops ...
...PREWASH button is lit, if I press it again, the light goes off and the HEATED DRYING button comes on, if I press that button (or the prewash again) it goes back to PREWASH. cutting power for a while ...
Question about 24 in. ADG7952 Built-in Dishwasher
...prewash option will be lit up, and the start button will be flashing. Holding down the start button clears the flashing but doesn't fix the problem. Any tips or recommendations would be greatly ...
Question about 24 in. SGS47E02 Exxcel Free-standing Dishwasher
...not program. Press and hold PREWASH button. After a few seconds it begins beeping. Keep holding PREWASH button in until beep gets quiet then eventually stops. Hope this helps - Colin, Billericay ...
...Prewash Option button four (4) times within five (5) seconds. C:00 will show in the display. NOTE: If Model does not have PREWASH Mode as an option, press RINSE/HOLD. If the Starting procedure fails, ...
PREWASH OPTION is not present on this model, press EXTRA RINSE two times. Read more: Whirlpool Duet Washer 'Control Locked' - The Laundry Appliance Repair Forum - Do-It-Yourself Appliance Repair Help
Question about 3.8 cu. ft. HE3 Front Load Washer
...button. Push PREWASH OPTION four times within five seconds. If PREWASH OPTION is not present on this model, press EXTRA RINSE four times within five seconds. C:00 will light up on the display. If the ...
Question about 3.8 cu. ft. HE3 Front Load Washer
...Prewash Option button four (4) times within five (5) seconds. C:00 will show in the display. NOTE: If Model does not have PREWASH Mode as an option, press RINSE/HOLD. If the Starting procedure fails, ...
Usually answered in minutes!
9,125 Questions
3,840 Questions
3,158 Questions
2,979 Questions
2,660 Questions
