Questions & Answers for: pool pump air lock

Question about 4000 GPH Filter Pump

1 Answer

...in the clear tube from the pump to the filter- put old pump back on same fittings & the old pump works ok you have to bleed the air out of the new pump before it will pump it has an air

Ad

Question about Automatic Salt Water System for Above Ground Saltwater Pool

1 Answer

...pool to pump has no debris at the motor housing hair can build up there then trap other debris no open you bleeder caps till water runs freely once water is coming out and you do not hear air turn on ...

Ad

Question about Automatic Salt Water System for Above Ground Saltwater Pool

1 Answer

...pump) to the lower hole (intake) on your pool. The attach the hose from the taller part (the filter part) to the taller hole on your pool. Open the spigot on both parts of the pool (turn, lift and ...

Question about EC65 Extended Cycle DE In Ground Pool Filter System with Pump

1 Answer

...air lock preventing hose. If you have a DE filter and sand is coming into the pool ... there is definitely a hole returning sand that bathers introduced into the pool ... You are using DE in your DE ...

Question about Krystal Clear Model 635 Pool Filter Pump 1500 Gph

1 Answer

...pool filter is running but it doesnt seem to **** the water in or out and we got this last year but every two weeks i had to take it apart and for about a week and a half it works and then doesnt Hi, ...

Question about Krystal Clear Model 635 Pool Filter Pump 1500 Gph

1 Answer

...pump strongly pulls water in, but the flow into pool is very weak. Air lock or dirty filter is not the issue. Any ideas? Many thanks! Anna It is likely that your filter is dirty. The filter's ...

Question about Threaded 1.5hp Fullrate 115/230v

1 Answer

...spins but does not pump water, most likely you have an air lock.Try priming the pump with water or remove the air lock at the pump by removing the cover off the filter basket that is next to the

Question about Pool Pump Motor Hayward Swimming Pool Pump Full Rated Motor / Cen

1 Answer

...water well pump hums but willnot start shaft to well is free g.e.1h.p.pump motor for shallow water well You may have an air lock/bubble. Try priming the pump with water before you switch on the

Question about Pool Pump Motor Hayward Swimming Pool Pump Full Rated Motor / Cen

1 Answer

Pump air locked From set up Take lid if pump off, and fill with water. Put lid back on and start. if still won't prime, check orings everywhere Air can be sucked in. System should be tight, so no air ...

... now the PSI is @ 0 when back on. What do i do? Did i break my pool? You may have a vapor lock which is a bubble of air that is stopping the pool pump from priming. Is there anyway to bleed off the ...

Not finding what you are looking for?

Ask a Question

Usually answered in minutes!

Top Pool & Spa Experts

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

73783 Answers

john h

Level 3 Expert

29497 Answers

Brad Brown

Level 3 Expert

19190 Answers

Are you a Pool & Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...