...755 projector that has a vesa input connector for a computer interface. I was trying to use an adapter cable to feed standard component video to this port. (ready made adapter cable is available on ...
...G300-WW. I have just purchased this projector today and the mains lead on it has a european 3pin plug attached,I need to connect wtih an English 3pin plug, can you tell me the safest way to do
Question about LP 755 Multimedia Projector
The infocus projects when the computer starts up but later says there is no connection. I have used the toggle keys but no success. are you using the cable wizard and comp1? if so, that may be your ...
InFocus LP 250 Multimedia Projector was working fine until i unplugged it and when I went to plug it back in, I used my computers power cord instead of the projector but the plug is almost identical. ...
...on and off cycling issue described in another post and when I reassembled the projector I forgot to plug the two wire plug back into the power board. The power light flashed. I removed the top cover ...
turning it back to normal after ceiling mount for LP755 hi, 1. perss menu button 2. select controls 3. then select ceiling projecton (When you turn Ceiling Projection on, the projector turns the image
My projector will display an image from my PC, but when connected to a video scource via the Phono socket or the SVideo socket, nothing, It just stays on the Infocus welcome screen. The menu ...
The screen keeps flashing Make sure you have a reliable video source plugged in beforeyou plug it in. It may be searching for a signal. Also try a different outlet as it may be a ground problem.
Question about LP530V Video Projector 2000 ANSI Lumens 6.6 lbs. DLP 4:3 XGA 400:1 (LP-530V, LP 530V) Multimedia Projector
I have a Infocus Lp530 that as soon as you plug it in, all the lights on the top will continually flash green and an audible clicking sound can be heard. These two things occur before the power button
my projector turns on and stays on for about a minute or two but then the image goes off along with the light. what is wrong with it? It sounds like overheating. Check the vents and filter and clean ...
Usually answered in minutes!
6 Questions
4 Questions